EOC Master(ONU+EOC+OR)OPE7921
Product Overview
OPE7921 is an all-in-one EOC Master with EOC master module, MC module and OR module.
We can one OPE7921 instead of three type products, HFC optical node, EPON ONU and EOC mater. It can reduce the number of active node in the system, decreasing failure rate and saving a space. It is the best choice of CATV, Internet and VOD for the operator.
The EOC Master Module in the OPE7921is based the Qualcomm AR7410 chipset solution,with high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. The EOC Master can provide high speed data service. The PHY Layer speed is 600Mbps, the MAC Layer throughput is up to 320Mpbs.
The OR module in the OPE7921 can provide an HFC optical input and one RF output. The CATV signal will convert from optical to RF signal here. The OR module is a high quality optical receiver product. It received the optical signal from the TX of HFC network, and the signal processed by the PIN, Amplifier, EQ and AGC to a stable RF output. The output level will be up to 108dBuv.
OPE7921built in a media convert, 10/100/1000Mbps media converter. The module supports IEEE 802.3, 802.3ab, 802.3u, 802.3z standards. It provide one SC/PC optical connector for 1000Base-Lx and one 10/100/1000M auto-negotiable Ethernet RJ45 interface.
Function Features
High integration with two EOC Master modules, one MC module and one OR modulen
Aluminum alloy die casting shaping, good heat dissipationn
Outdoor waterproof designed, 60V/220V power supply optionaln
7.5-65Mhz frequency for EOC signals., no influence on CATV Servicen
Support data encryptionn
Support broadcast storm limitationn
Support data packet statisticsn
Support auto-update and auto-configurationn
Support the optical power monitorn
Flexible bandwidth allocation functionn
Support various QOS service leveln
EMS network management based on SNMPn
Provide a rich fault alarm function, easy to fault diagnosisn
Support software online upgraden
OR support AGCn
CATV RF output up to 108dBuvn
MC module is one standard media converter, provide different optical connector for different application requirementn
Network management optionaln
Compliant with the third-party equipmentn
Support EMS based SNMPn
Specification
Item |
Parameters |
Specification |
Specification of EOC Module |
||
Interface and LED Indicator |
RF Port |
One TV (CATV Signal) Output, metric F-Female One CABLE (Mixed Signal) Input, metric F-Female |
Ethernet Port |
Two10/100/1000Mauto-negotiation, RJ45 | |
LED Indicator |
1 for Power Supply Status 1 CABLE Link Status indicator 2 for Ethernet Ports Status |
|
Performance Parameters |
RF Parameters |
Frequency Band :7.5-65MHz RF Output Level:110±5dBuv@ output of module Receive sensitivity: 45dBuv Return Loss:>16dB Output Resistance:75Ω |
Transmission |
PHY Layer:600Mbps Throughput on MAC Layer:320Mbps |
|
Modulation Mode |
OFDM~ 2690~carriers 4096,1024,256,64,16,8~QAM, QPSK, BPSK, ROBO | |
Working Mode |
TDMA/CSMA | |
Encryption Mode |
AES-128 | |
Standard |
EOC Standard |
IEEE P1901(Draft) HomePlug AV |
Ethernet Standard |
IEEE 802.3, IEEE 802.3x, IEEE 802.3u IEEE802.1P, IEEE802.1Q |
|
Software |
Network Management |
WEB, CLI, SNMP |
Software Features |
VLAN, QOS, Bandwidth Control, Broadcast storm limitation | |
Specification of OR |
||
Optical Specifications |
Wavelength |
1100~1600 nm |
Optical Power Input Range |
-8~+2 dBm | |
Recommend optical Power Input Range |
-6~0 dBm | |
Optical Input Return Loss |
≥45 dB | |
RF Specifications |
Bandwidth |
45~870 MHz |
Flatness |
≤±0.75 dB | |
Stability of RF output under Operating Temperature |
≤5 dB | |
Nominal RF Output Level |
108 dBuV | |
Impedance |
75 Ohm | |
Return Loss |
≥14 dB | |
CNR |
≥51 dB | |
CSO |
≥60 dBc | |
CTB |
≥65 dBc | |
Power consumption |
<7.5 W | |
Optical and temperature AGC |
Stability of RF output under optical AGC |
≤±1 dB |
AGC Scope |
-6~0dBm | |
LED Indicator |
Indicator Description |
RUN: module operating RF: RF signal PWR:Power is coming up OPTH: Optical power is higher OPTM: Optical power is nominal OPTL: Optical power is lower |
Specification of MC |
||
Interface |
Copper Port |
One 10/100/1000Mauto-negotiation, RJ45; Compliant with IEEE802.3, IEEE802.3u,IEEE802.3z Auto MDI/MDI-X Full/Half-Duplex Up to 100m distance |
Fiber Port |
Connector Type: One SC/PC 1000Base-SX,1000Base-Lx 1.25Gbps Wavelength 850nm/1310nm/1550nm optional Transmission distance 2~100KM |
|
Power Supply |
2PIN socket, 12V DC | |
Indicator Description |
PWR |
On:+5V Power is coming up Off:+5V no power supply |
Fiber |
On:Optical Linked Blink:In transmitting or receiving Off:Not connected or link trouble |
|
1000M |
On:Linked on 1000Mbps Blink: optic port connected well Off:Not connected or link trouble |
|
Act |
On:Physical link is OK Blink: In transmitting or receiving Off:Not connected or link trouble |
|
Performance Parameters |
Working Mode |
Store-and-forward |
Max Packet Length |
9K bytes | |
Packet Forwarding |
1488000pps (64bytes/Frame) | |
latency |
< 5us @64bytes, 28us@1518bytes | |
Packet Loss |
operating temperature range:Packet Loss in 72 hours:0% Long-term Packet Loss:<10-7 (64 ~9728 bytes @ 100% throughput) |
|
Physical Features |
||
Physical Features |
Power supply & Consumption |
Power Supply:220V/60V optional Consumption:<24W |
Size & Net weight |
Dimension:290×220×120mm Weight:3.7kg |
|
Environment Attribute |
Working Temperature:-10~65℃ Storage Temperature:-40~85℃ Working humidity:10%~90%non-condensing Storage humidity:10%~90% non-condensing |